|Order Ref AS4001|
Part No. T4360A1009
| Honeywell T4360 Mechanical Wired Frost Thermostat|
The price or availability cannot be determined at this time. Please contact us if you would like more information regarding this product.
|The T4360 is a mains voltage frost thermostat designed to give automatic frost protection to boilers and pipework, situated in risk areas, as well as to the fabric of the building. |
Dual diaphragm temperature sensing element.
Suitable for surface or switch box mounting.
Tamper resistant cover.
Design suits any decor.
Voltage Rating 230V AC 50Hz.
Switch rating 10A resistive, 3A inductive.
Switch Type Single pole, single throw (SPST)
Temperature setting range 3 to 20 Deg C with blue arrow frost setting at 5 Deg C
Standards Complies with BS EN60730-2-9
Height 84mm x Width 84mm x Depth 37mm
The Frost Thermostat must be located in the coldest part of the house, but where it can respond to a rise in temperature as a result of switching on the boiler. If situated in an outhouse or garage, it is strongly recommended that a pipe thermostat should also be used to switch off the boiler when the return temperature reaches a predetermined level, unless the location will ensure that the T4360A will pick up a temperature rise.
It must only be located inside a dwelling or outhouse, and not directly exposed to the weather. A frost thermostat should not be fitted outdoors.
The thermostat must be wired to override all other time and temperature controls and preferably to switch on the heating circuit, rather than the hot water circuit. To ensure correct operation the thermostat should be mounted on a vibration free surface.
|2 in stock immediately from our shop. More are available.|
|Don't want to install this yourself ? We offer installation and maintenance services within a 5 mile radius of our store in West London W13. We are Insured, Referenced and provide a full warranty for work and materials. Give us a call to discuss your requirements or Click here to contact us.|